blown film extruder machine-manufacture,factory,supplier from China

Three layers co-extrusion film blowing machine is composed of three single screw extruders, three layer composite co-extrusion die , cooling system, tractor, film coiling device, temperature and electric control system.

Two-layer co-extrusion blown film line by two single screw extruder, two layer co-extrusion blown film die head, cooling system, tractor, winder and temperature and electric control system, mainly used in open width 2000-2800mmtwo-layer co-extrusion mulch film. NO.ItemNumber1Extruder SJ-55/30  22Manual fast change filter device23Two layers co-extrusion dieφ33014Cooling system15Steady bubble device16Upper-driving device17Flattening board18Traction frame and guide roller group19Secondary traction device110Double station back to back friction winder1 Agricultural Plastic Greenhouse

Three-layer co-extrusion blown film line by three single screw extruder, three layer composite co-extrusion blown film die head, cooling system, tractor, film reel and temperature and electric control system, mainly used in open width 1350-2000mm three-layer co-extrusion film.  Specification of Packaging Film Blowing Machine CHARACTERISTIC1. Frequency inverters control main motor and traction motor.2. Material of screw and barrel: 38CrMoAl-A after nitrogen treatment.3. Gear box: HARD teeth gear surface, casting alloy piston, high precise grinding, long life.4.

This machine is mainly used to produce three-layer composite plastic wide-width impermeable film and geomembrane.

Pipe AdvantagesHigh wear resistance:It's 4-7 times of steel pipes, 3times of HDPE pipes, 4 times of nylon pipes.

inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.

inlaid cylinder emitter drip irrigating pipe extruder descriptionThis production line is mainly used to prodcue all kinds of drip irrigation pipe, which are widely used in agriculture and construction water supply and drainage and cable laying. This production line is composed of conical (parallel) twin-screw extruder, headpiece, vacuum sizing device, traction machine, cutting machine and stacking device. The extruder and traction machine adopts frequency control. The traction machine can be with two, three, four, six, eight claws.

1. The goods are packed in accordance with requirements of the manufacturing plant and standards of the Chinese People's Republic.2. Each place be fixed in accordance to the particularities of the goods.

The agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.

Short description1.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.2. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.3.Our plastic making machine can make many kinds of plastic productions l

Product Application:This product is mainly used for mine escape pipes, fly ash transportation, marine dredging pipes, etc.Supply Ability:10 Set/Sets per Month UHMWPE Pipe Extrusion Mahcine LinePackaging Details:Usually we use a wrapping film to wrap the machine, then fix the machine with a wire rope, or use wood packaging according to your needs.Technical Parameters:Extruder modelSJ-75/20SJ-90/20SJ-150/20SJ-200/20SJ-240/20Pipe OD range40-89mm90-159mm160-500mm500-800mm800-1200mmMotor power15Kw18.5Kw30Kw55Kw75KwOutput(kg/h)Bracket lengthAccording by clients needTotal power<30<45<65<8

Plastic pipe making machine: It is mainly composed of electrical control production-cabinet-rolling machine-pump-cooling water tank-collection and other parts, which can produce various styles and models of plastic pipes.It is equipped with a special single-screw extruder for polyolefin, which has the characteristics of high-speed foundation and high-speed speed.Professional separate mixing screw for polyolefin.SpecificationPipe diameter12mm16mm20mmWall thickness0.15-0.5mm0.15-0.5mm0.15-0.5mmTolerance±0.05mm±0.05mm±0.05mmApplication:PIPEPlastic Processed:PECondition:NewScrew Design:Single-scre

Product Description:New generation UHMWPE pipe extrusion line uses patented equipments and technology of Huaya company, relizescontinuous extrusion of pipes.

As the viscosity of UHMW-PE molten state reaches up to 108Pa*s, liquidity is poor, and melt index is almost zero, so UHMW-PE is hard to be processed by general mechanical processing method.

Main production introductionThe micro-spray belt making machine is used to make agriculture inline drip irrigation hose .In order to produce this agriculture inline drip irrigation hose making machine, our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced agriculture inline drip irrigation hose making machine in our company at present.

HDPE pipe features1. HDPE Pipe Extruding Line adopts DC motor, and Eurotherm DC digital converter and high efficiency screw to ensure high efficiency extrusion.2. HDPE Pipe Extruding Line adapts basket type composite die head, which ensures not only the uniformity of high speed extrusion but also the stable performance of tubular goods3. HDPE Pipe Extruding Line adopts high efficiency double chamber vacuum calibrating technology and spray cooling bath to improve the rate of finished products of tubular goods and meet the demand of high-speed production.

Short description1. It is a high-tech enterprise which is specialized in research, manufacture and marketing plastic extrusion lines,plastic production line.2.Our plastic extrusion lines based on Plastic Extruders:Single Screw Extruder,Conical Twin Screw Extruder and Parallel Twin Screw Extruder.3.Our plastic making machine can make many kinds of plastic productions l

Hight-efficiency single screw extruder has 8 strandard sizes:Φ30, Φ45, Φ65, Φ75, Φ90, Φ105, Φ120, Φ150mm, and the L/D ratio is 30:1D-37:1D Effective length. All the equipments are controlled by the PLC/PCC smart modular, further more the automatic control, real-time data record and closed-loop control are realizd. The advantage are high output, high adaptability for differnt raw material, highly stable good-quality extrusion and soon.HDPE pipe features:1.

Uhmwpe pipe making machine features1. According to our years of experiment and practice, the small screw pitch and big screw diameter are adopted for our UHMWPE pipe extrusion line. The production line can melt the UHMWPE, whose melt index is near 0, and slowly extrude it continuously.2. Our UHMWPE pipe extruder, comparing with normal plastic pipe extrusion machine, doesn’t need the cooling fan for the spiral barrel. Each section of the UHMWPE pipe extrusion machine comes with an independent control system, so the temperature precision and energy efficiency are both great.

Equipment features:1. Adopts PLC centralized control, stable production process, easy to operate, energy efficient.2. The emitters feeding, screening, transportation, inlaying, pipe output, drilling and rewinding are completed synchronously, high automation.3. The extruded materials are uniformly plasticized, the drip tape surface is smooth and the sizing is accurate.4. The traction machine adopts frequency control, it can be used for a variety of processing requirements. On the track surface has rubber protective layer, can effectively prevent the deformation of drip tape.5.

main production features1) Dripper and pipe unified,it is convenient for installation and usage,low cost and small investment. 2) The dripper has inherent filtration window,it has good performance of resisting blockage. 3) The machine adopts ladyrinth type passageway,it has certain pressure compensation effect. 4)The space between the dripper can adjust according to the customers' requirements.main production parametersextruder typeSJ-55/28pipe diameter10mmscrew typesingle screwwall thickness0.6mmproduction speed80-200m/minemitter maximum screening speed800pcsemitter inlaid

production line advantages1. It is non-toxic,odorless,anti-aging,lightweight and long serivce life;2.Using high-quality,high tensile-strength PE raw material;3.Holes smooth and evenly,have good resistance to jam;4.According to different crops,selecting diferent holes design,sprary effect is ideal;5.Usingcooperatively with agricultural pumps and low pressure water pipelines use,saving time and saving water;6.Connection with the multi-fountion value,it is free to adjust spraying width,height and area by adjusting the water pressure;7.

Short descriptionThe agriculture inline  drip irrigation hose extruder machine  is used to make agriculture  inline  irrigation hose tube  .In order to produce this agriculture inline irrigation drip hose extruder machine , our company makes full market research and assimilates the advanced technology from domestic and overseas. And this machine is the most advanced  agriculture inline irrigation drip hose extruder machine in our company at present.

Drip irrigation tape production line This equipment is mainly composed of a high-speed nozzle machine, a diameter measuring control tube system, a hot press forming machine, a cutter dividing machine, an air intake machine, and a coiling machine. It has the characteristics of simple operation, winding control, high production efficiency and energy saving.